Lake Country UDOS 31e Functions:

• Rotary – Incredible cutting power and great versatility – rotary action offers maximum cut when you need it the most!
• 8MM Random Orbital – Ultimate finesse for gentle polishing, and a safe entry-level mode for learners!
• 15MM Random Orbital – Great cut for heavy defect correction, combined with efficient polishing ability!

Cooling NACA Duct Technology

The Lake Country UDOS 31e features cooling NACA Duct Technology which reduces pad surface temperature to improve tool and compound effectiveness & efficiency! NACA ducts draw fresh air through the backing plate and force it into the pad, offering multiple benefits and advantages including:

• Retain structural integrity
• Maintain operation efficiency
• Increase pad durability and lifespan

Lake Country UDOS 31e Features:

• Rotary & 2x Random Orbital Modes – Three key modes with everything you need for ultimate cutting power, everyday polishing and ultra-fine finishing abilities.
• Lighter Weight – Comfortable handling and control over long periods make the UDOS 31e easy to love with, and accessible to less experienced operators.
• Replaceable Rubber Bumpers – With safety, durability and lifespan in mind, the soft bumpers keep the tool from sliding and are replaceable.
• UDOS Backing Plate with NACA Duct Technology – NACA ducts draw air through the backing plate to keep pads cooler, working at their best, and lasting longer.
• Dual-Sided Trigger Lock Mechanism – A polisher designed to suit right or left handed users, offering intuitive operation for everyone.
• Simplified Mode Selection – Initiative collar control makes switching even simpler, choose from Rotary, 8mm Random Orbital or 15mm Random Orbital mode in a fraction of a second!
• Longer Handle – Greater access to long-reach areas such as RV roof panels, high sides of trucks and boats, etc.
• Angled Cord Relief – Minimizes strain on cord connection, especially when positioned over the shoulder, to promote longevity & durability of the tool.

Lake Country UDOS 31e Specifications:

• Motor: 1680 Watt, 14 amp Motor
• OPM Range: 900 – 3,600
• Cord Length: 13ft rubber cord
• Trigger: Variable Speed Trigger with Trigger Lock
• Housing: Molded Glass Filled Nylon and Metal Housing with Rubber Handle
• Voltage: 110 volt
• Backing Plate: 5″ Hook & Loop L.C.P.T Backing Plate
• Weight: 6.9 lbs.
• Backing Plate Accepts Standard 5″ and 6″ Hook & Loop Sandpaper
• UDO Pad Range is Recommended for Optimal Performance
• Overall Dimensions: 18″ Long x 3.625″ Wide x 6″ Tall (including bumpers/backing plate)

Full line of industry standard Rotary Backing Plates

Benefits:

• High Strength Molded Urethane – This material helps to absorb the heat created while also allowing flexibility over the buffing surface
• Grip Easy Edge – Allows for fast and easy pad changes
• Inner Steel construction – The backing plate is constructed with plated steel insert to withstand Rotary machine use

Conventional foam pads absorb polish too quickly. This reduces polish and pad performance because most of the polish is trapped below the working surface of the pad. CCS Technology solves this common problem using strategic patterns of partially closed foam cells. Now available on our Standard Duty Orbital (SDO) pads, giving the operator the same consistent performance of our SDO pads, with the added benefit of CCS technology.

Benefits:

• Slow Rate of Polish Absorption – CCS pockets gradually release polish as needed by the operator.
• Prevents Pad Skipping – CCS pockets reduce surface tension allowing operator to run pad flat on working surface.
• Tapered Edge – Prevents pad rolling and provides great pad rotation which is great for curved and contoured panels. This allows for precision polishing in tight areas.

Conventional foam pads absorb polish too quickly. This reduces polish and pad performance because most of the polish is trapped below the working surface of the pad. CCS Technology solves this common problem using strategic patterns of partially closed foam cells. Now available on our Heavy Duty Orbital (HDO) pads, giving the operator the added benefit of the durable, dual layer design and tapered edge.

Benefits:

• Slow Rate of Polish Absorption – CCS pockets gradually release polish as needed by the operator.
• Prevents Pad Skipping – CCS pockets reduce surface tension allowing operator to run pad flat on working surface.
• Dual Layer – The dual layer design reduces lateral/horizontal movement, resulting in a reduction of friction inside the pad which increases durability by eliminating excessive heat and reduces foam fatigue.

The Hybrid foams are specially engineered with small cells and dense construction to keep abrasives in the chemicals close to the surface of the pad.

Benefits:

• Less Polish / Quicker Results – Faster correction time as more polish stays on the working surface rather than being absorbed into the foam.
• Pad Design – The buff backed design on the backside of the pad protects the backing plate from contact with the working surface, while maintaining consistent pressure across the pad.

This pad works well on gelcoat to remove oxidation and can be used as a one step pad due to the amazing finish it provies. For DA, this pad is ideally used for heavy compounding, bringing superior cutting abilities compared to a microfiber pad.

Benefits:

• Unique Wool Material and 1/2″ Pile – Low Lint pads feature an amazing cut with an unmatched finish. Offering superior residue control and better performance while operating on any maching, along with reduced linting versus a traditional wool pad.
• Universal – Universal use and performance on all types of machines gives the user increased flexibility.
• Center Ventilated Cooling Channel – Dissipates heat away from the center of the pad, reducing temperatures and increasing durability. The system also allows for perfect pad alignment.

Snappy Clean Boost Pad Cleaning Powder, is a concentrated cleaner that releases wax and polish from the foam, wool, or microfiber pads with just a few minutes of soaking. Bio-degradable, non-flammable, and rinses out easily.

Benefits:

• Releases wax and polish build up from your foam, wool, or microfiber pads – Keeps pads clean, soft, and supple.
• Bio-degradable and non-flammable – Environmentally safe.
• Rinses out easily – Clean foam pads without any signs of residue.

No plug-ins or attachments required

Benefits:

• Versatile and Durable – Cleans both foam and wool pads. Cleans most sizes and thicknesses of pads
• Portable – Self-contained; making it easy to move to your work station
• Save Money – Regular cleaning extends the useful life of pads

100% 4 ply twisted wool for cutting action. Rubber core for long-lasting durability. Carbon steel hex shaft prevents slippage. Compatible with standard quick connect systems.

Benefits:

• Contour Buffing – Composite, marine, automotive, aviation and household.
• Versatile – Ideal for fiberglass molds, gel coats, composites, metals and painted surfaces.
• Multi-Industry Applications – Composite, marine, automotive, aviation and household.

Professional grade hand applicators for wide coverage, safe contact, easy to hold in the hand, and just right for access in tight spots too.

Benefits:

• CCS Applicators – Our patented CCS Technology reserves some wax product away from the surface in non-absorbent pockets, enabling users to apply a constant fine layer of wax over a larger area without having to keep returning to the pot!